The product was delivered without instructions, and there is no detailed explanation in your information on how do we make it work on an existing car or any other remote controlled Garage or Gate.

433MHZ Auto Pair Copy Remote 4 Buttons Garage Gate Door Remote Controller Sensitive with key ring

Description:

100% brand new and high quality.

Small size and lightweight, easy for carry, Simple design and easy to use

One to one key copy, each key password alone save, can continuous repetitive copy use one million times

Privacy is strong, especially suitable for home his copy their remote control

Specifications:

Type: Remote Controller

Model: AK-KB1301

Remote control distance: 50-100M(sensitivity of receiving device -100dbm in open environment)

Number of keys: 4keys

Copy chip type reference: Learning code(HS1527, EV1527, HT6P20B, etc.), Fixed code(HS2260, HS2260, PT2260, SC2262, etc.)

Material: ABS

Color: black

Size: 6.8*1.6*1.5CM

Working Frequency: 433MHZ

Battery type: 12V  27A (included)

Package Include:1 x Remote Controller

Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 1-3cm differences due to manual measurement.

Copy method:

1. Clear code:Before copying, clear the factory's production when copying into the test code, while holding the remote control as shown in the figure

The two keys do not break up. When about 3 seconds are pressed, the light has a flash to slow flash and then release, and then press any key alone.

The light does not shine, indicating that the clear code is successful.

2. Remote control copy method: hold down the copy of the remote control to copy the key does not let go, while holding down the copy to be copied

The remote control does not let go of the keys to copy. The two remote controls are close by for about 3 seconds. The copy remote control light never lights up.

Go to the slow flash again to flash, at this point let go, try to press this button again, the light will be on, indicating copy replication success.

Other keystrokes copy the same way.

3. Remote control recovery function:If the code was accidentally cleared, press the top two keys as shown in the figure 2 seconds light, indicating

The inner code recovered successfully.

The previous reply refers to 2 illustrations. Where are they?

Hello

As previous post, the gadgets came without instruction. Please send instructions and ilustrations.